urpei

François Bertrand

Directeur de l'URPEI

 

Domaines de recherche

  • Modélisation physique et numérique d'écoulements de fluides complexes et polyphasiques
  • Modélisation physique et numérique des écoulements granulaires
  • Méthode des éléments finis
  • Méthode des éléments discrets
  • Méthode de Boltzmann sur réseaux
  • Algorithmique concurrente et calcul parallèle
  • Dynamique du mélange et de l’agitation
  • Dynamique du couchage du papier

 

Curriculum Vitae

  • Doctorat en génie chimique (1993-1996)
    • Institut National Polytechnique de Lorraine
    • Nancy
    • France
  • Baccalauréat en informatique (1990-1992)
    • Université Laval
    • Sainte-Foy, QC
    • Canada
  • Maîtrise en mathématiques (analyse numérique) (1984-1985)
    • Université Laval
    • Sainte-Foy, QC
    • Canada
  • Baccalauréat en mathématiques (1981-1983)
    • Université Laval
    • Sainte-Foy, QC
    • Canada

 

Publications

Publications avec comité de lecture

124. S. Leclaire, J. Latt, D. Vidal and F. Bertrand, 2018. Multiphase periodic pressure difference boundary condition enhanced by a proportional-integral-derivative controller for the lattice Boltzmann method, accepted in Int. J. Num. Meth. Fluids.

123. Q, Xiong, F. Xu, Y. Pan, Z. Gao, S. Shu, F. Bertrand and J. Chaouki, 2018. Major trends and roadblocks in CFD-aided process intensification of biomass pyrolysis, Chem. Eng. Proc. (Proc. Int.), 127, 206-212.

122. O. Bertrand, B. Blais, F. Bertrand and L. Fradette, 2018. Complementary methods for the determination of the just-suspended speed and suspension state in a viscous solid-liquid mixing system, Chem. Eng. Res. Des, 136, 32-40.

121. G. Patience, C. Patience and F. Bertrand, 2018. Chemical Engineering Research Synergies Across Scientific Categories, Can. J. Chem. Eng., 96, 1684-1690.

120. B. Blais, O. Bertrand, L. Fradette and F. Bertrand, 2017. Unresolved CFD-DEM Simulations of Turbulent Solid-Liquid Mixing: Prediction of Suspension Curve and Just-Suspended Speed, Chem. Eng. Res. Des., 123, 388-406.

119. G. Patience, C. Patience, B. Blais and F. Bertrand, 2017. Citation Analysis of Scientific Categories, Heliyon, 3, e00300.

118. B. Blais and F. Bertrand, 2017. CFD-DEM Investigation of Viscous Solid-Liquid Mixing: Impact of Particle Properties and Mixer Characteristics, Chem. Eng. Res. Des., 118, 270-285.

117. S. Douieb, S. Archambault, L. Fradette, F. Bertrand and B. Haut, 2017. Effect of the Fluid Shear Rate on the Induction Time of CO2-THF Hydrate Formation, Can. J. Chem. Eng., 95, 187-198.

116. G. Patience, C. Patience, F. Bertrand, P. Patience and D. Boffito, 2016. How do you write and present research well? 19–Emulate Articles in High Impact Factor Journals, Can. J. Chem. Eng., 94, 2237-2239.

115. H. Bashiri, F. Bertrand and J. Chaouki, 2016. Development of a Multiscale Model for the Design and Scale-up of Gas/Liquid Stirred Tank Reactors, Chem. Eng. J., 297, 277-294,

114. M. Rasouli, O. Dubé, F. Bertrand and J. Chaouki, 2016. Investigating the Dynamics of Cylindrical Particles in a Rotating Drum Using Multiple Radioactive Particle Tracking, AIChE J, 62, 2622-2634.

113. D. C. Boffito, C. A. Patience, P. A. Patience, F. Bertrand and G. S. Patience, 2016. How do you write and present research well? 8 — Assign authorship according to intellectual involvement, Can. J. Chem. Eng., 94, 805-808.

112. G. Patience, C. Patience, D. Boffito, P. Patience and F. Bertrand, 2016. How Do you Write and Present Research Well? 7 – Cite to Get Cited, Can. J. Chem. Eng., 94, 1127-1134.

111. M. Lassaigne, B. Blais, L. Fradette and F. Bertrand, 2016. Experimental Investigation of the Mixing of Viscous Liquids and Non-Dilute Concentrations of Particles in a Stirred Tank, Chem. Eng. Res. Des., 108, 55-68.

110. L. Spreutels, J. Chaouki, B. Haut, R. Legros and F. Bertrand, 2016. Experimental Investigation of Solid Particles Flow in a Conical Spouted Bed Using Radioactive Particle Tracking, AIChE Journal, 62, 26-37.

109. L. Spreutels, J. Chaouki, F. Bertrand, B. Haut and R. Legros, 2016. Gas Residence Time Distribution in a Conical Spouted Bed, Powder Technology, 290, 62-71.

108. B. Blais, M. Lassaigne, C. Goniva, L. Fradette and F. Bertrand, 2016. Development of an Unresolved CFD-DEM Model for the Flow of Viscous Suspensions and its Application to Solid-Liquid Mixing, J. Comp. Phys., 318, 201-221.

107. G. Matte-Deschênes, D. Vidal, F. Bertrand and R.E. Hayes, 2016. Numerical Investigation of the Impact of Thermophoresis on the Capture Efficiency of Diesel Particulate Filters, Canadian Journal of Chemical Engineering, 94, 291-303.

106. B. Blais, M. Lassaigne, L. Fradette and F. Bertrand, 2016. A Semi-Implicit Immersed Boundary Method and its Application to Viscous Mixing, Comp. Chem. Eng, 85, 136-146.

105. H. Bashiri, E. Alizadeh, F. Bertrand and J. Chaouki, 2016. Investigation of Turbulent Fluid Flows in Stirred Tanks Using a Non-Intrusive Particle Tracking Technique, Chemical Engineering Science, 140, 253-261.

104. S. Douieb, L. Fradette, F. Bertrand and B. Haut, 2015. Impact of the Fluid Flow Conditions on the Formation Rate of CO2 Hydrates in a Semi-Batch Stirred Tank Reactor, AIChE Journal, 61, 4387-4401.

103. B. Blais, J.-M. Tucny, D. Vidal and F. Bertrand, 2015. A Conservative Lattice Boltzmann Model for the Volume-Averaged Navier-Stokes Equations Based on a Novel Collision Operator, Journal of Computational Physics, 294, 258-273.

102. B. Blais and F. Bertrand, 2015. On the Use of the Method of Manufactured Solutions for the
Verification of CFD Codes for the Volume Averaged Navier-Stokes Equations, Computers & Fluids, 114, 121-129.

101. M. Rasouli, F. Bertrand and J. Chaouki, 2014. A Multiple Radioactive Particle Tracking Technique to Investigate Particulate Flows, accepted in AIChE Journal, 61, 384-394.

100. L. Spreutels, B. Haut, J. Chaouki, F. Bertrand and R. Legros, 2014. Conical Spouted Bed Drying of Baker's Yeast: Experimentation and Multi-Modeling, Food Research International, 62, 137-150.

99. O. Dubé, D. Dubé, J. Chaouki and F. Bertrand, 2014. Optimization of Detector Positioning in the Radioactive Particle Tracking Technique, Applied Radiation and Isotopes, 89, 109-124.

98. E. Alizadeh, F. Bertrand and J. Chaouki, 2014. Discrete Element Simulation of Particle Mixing and Segregation in a Tetrapodal Blender, Comp. Chem. Eng., 64, 1-12.

97. E. Alizadeh, F. Bertrand and J. Chaouki, 2014. Comparison of DEM Results and Lagrangian Experimental Data for the Mixing and Segregation of Granules in a Rotating Drum, AIChE J., 60, 60-75.

96. V. Stobiac, P.A. Tanguy and F. Bertrand, 2014. Investigation of the Accuracy of the Extrapolation Method for the Lattice Boltzmann Simulation of Viscous Fluid Flow in a Maxblend Impeller System, accepted in Comp. Chem. Eng, 60, 112-123.

95. H. Bashiri, M. Heniche, F. Bertrand and J. Chaouki, 2014. Compartmental Modeling of Turbulent Fluid Flow for the Scale-up of Stirred Tanks, Canadian Journal of Chemical Engineering, 92, 1070-1081.

94. V. Stobiac, L. Fradette, P.A. Tanguy and F. Bertrand, 2014. Pumping Characterization of the Maxblend Impeller for Newtonian and Strongly Non-Newtonian Fluids, Canadian Journal of Chemical Engineering, 92, 729-741.

93. O. Dubé, M. Ackley, C. Celik, J. Chaouki and F. Bertrand, 2014. Discrete Element Simulation of the Dynamics of Adsorbents in a Radial Flow Reactor Used for Gas Prepurification, Adsorption, 20, 91-107.

92. O. Dubé, E. Alizadeh, J. Chaouki and F. Bertrand, 2013. Dynamics of Non-Spherical Particles in a Rotating Drum, Chem. Eng. Sci., 101, 486-502.

91. E. Alizadeh, H. Hajhashemi, F. Bertrand and J. Chaouki, 2013. Experimental Investigation of Solid Mixing and Segregation in a Tetrapodal Blender, Chemical Engineering Science, 97, 354-365.

90. E. Alizadeh, O. Dubé, F. Bertrand and J. Chaouki, 2013. Characterization of Mixing and Size Segregation in a Rotating Drum by a Particle Tracking Method, AIChE J., 59, 1894-1905.

89. J. Bouffard, A. Cabana, J. Chaouki and F. Bertrand, 2013. Experimental Investigation of the Effect of Particle Cohesion on the Flow Dynamics in a Spheronizer, AIChE J., 59, 1491-1501.

88. E. Alizadeh, F. Bertrand and J. Chaouki, 2013. Development of a Granular Normal Contact Force Model Based on a non-Newtonian Liquid Filled Dashpot, Powder Technology, 237, 202-212.

87. V. Stobiac, P.A. Tanguy and F. Bertrand, 2013. Boundary Conditions for the Lattice Boltzmann Method in the Case of Viscous Mixing Flows, Computers and Fluids, 73, 145-161.

86. Y. Guntzburger, A. Fontaine, L. Fradette and F. Bertrand, 2013. An Experimental Method to Evaluate Global Pumping in a Mixing System: Application to the Maxblend™ for Newtonian and non-Newtonian Fluids, Chemical Engineering Journal, 214, 394-406.

85. J. Bouffard, F. Bertrand. J. Chaouki and H. Dumont, 2013. Discrete Element Investigation of Flow Patterns and Segregation in a Spheronizer, Comp. Chem. Eng., 49, 170-182.

84. A. Fontaine, Y. Guntzburger, F. Bertrand, L. Fradette and M.-C. Heuzey, 2013. Experimental Investigation of the Flow Dynamics of Rheologically Complex Fluids in a Maxblend impeller system using PIV, Chemical Engineering Research and Design, 91, 7-17.

83. J. Bouffard, F. Bertrand, J. Chaouki and S. Giasson, 2012. Control of Particle Cohesion with a Polymer Coating and Temperature Adjustment, AIChE J., 58, 3685-3696.

82. J. Bouffard, F. Bertrand and J, Chaouki, 2012. A Multiscale Model for the Simulation of Granulation in Rotor-Based Equipment, Chemical Engineering Science, 81, 106-117.

81. F. Bertrand, C. Devals, D. Vidal, C. Séguineau de Préval and R.E. Hayes, 2012. Towards the Simulation of the Catalytic Monolith Converter Using Discrete Channel-Scale Models, Catalysis Today, 188, 80-86.

80. C. Rivera, M. Heniche, F. Bertrand, R. Glowinski and P.A. Tanguy, 2012. A Parallel Finite Element Sliding Mesh Technique for the Simulation of Viscous Flows in Agitated Tanks, Int. J. Num. Fluids, 69, 657-670.

79. M. P. Guerrero, F. Bertrand and D. Rochefort, 2011. Activity, Stability and Inhibition of a Bioactive Paper Prepared by Large-Scale Coating of Laccase, Chem. Eng. Sci., 66, 5313-5320.

78. M. Perrault, F. Bertrand and J. Chaouki, 2011. An Experimental Investigation of the Effect of the Amount of Lubricant on Tablet Properties, Drug Development and Industrial Pharmacy, 37, 234-242.

77. G. Pianet, F. Bertrand, D. Vidal and B. Mallet, 2011. Discrete Element Method Based Models for the Consolidation of Particle Packings in Paper Coating Applications, Asia-Pacific Journal of Chemical Engineering, 6, 44-54.

76. M. Rebai, F. Drolet, D. Vidal, I. Vadeiko and F. Bertrand, 2011. A Lattice Boltzmann Approach for Predicting the Capture Efficiency of Random Fibrous Media, Asia-Pacific Journal of Chemical Engineering, 6, 29-37.

75. J. Olmiccia, M. Heniche and F. Bertrand, 2011. A Particulate Method for Determining Residence Time in Viscous Flow Processes, Macromolecular Materials and Engineering, 296, 362-372.

74. S. Navaee-Ardeh, F. Bertrand and P. Stuart, 2011. A 2-D Distributed Model of Transport Phenomena in a Porous Media Biodrying Reactor, Drying Technology, 29, 153-162.

73. S. Navaee-Ardeh, F. Bertrand and P. Stuart, 2011. Development and Experimental Evaluation of a 1-D Distributed Model of Transport Phenomena in a Continuous Biodrying Process for Pulp and Paper Mixed Sludge, Drying Technology, 29, 135-152.

72. D. Vidal, R. Roy and F. Bertrand, 2010. A Parallel Workload Balanced and Memory Efficient Lattice-Boltzmann Algorithm with Single Unit BGK Relaxation Time, Comp. & Fluids, 39, 1411-1423.

71. M. Perrault, F. Bertrand and J. Chaouki, 2010. An Investigation of Magnesium Stearate Mixing in a V-Blender Through Gamma-Ray Detection, Powder Technology, 200, 234-245.

70. S. Navaee-Ardeh, F. Bertrand and P. Stuart, 2010. Key Variables Analysis of a Novel Continuous Biodrying Process for Drying Mixed Sludge, Bioresource Technology, 101, 3379-3387.

69. D. Vidal, R. Roy and F. Bertrand, 2010. On Improving the Performance of Large Parallel Lattice Boltzmann Flow Simulations in Heterogeneous Porous Media, Comp. & Fluids, 39, 324-337.

68. C. Devals, A. Fuxman, F. Bertrand, J.F. Forbes, M. Perrier and R.E. Hayes, 2009. Enhanced Model Predictive Control of a Catalytic Flow Reversal Reactor, Can. J. Chem. Eng., 87, 620-631.

67. H.A. Lécuyer, J.P. Mmbaga, R.E. Hayes, F. Bertrand and P.A. Tanguy, 2009. Modelling of Forward Roll Coating Flows with a Deformable Roll: Application to Non-Newtonian Industrial Coating Formulations, Comp. & Chem. Eng., 33, 1427-1437.

66. D. Vidal, C. Ridgway, G. Pianet, J. Schoelkopf, R. Roy and F. Bertrand, 2009. Effect of Particle Size Distribution and Packing Compression on Fluid Permeability as Predicted by Lattice-Boltzmann Simulations, Comp. Chem. Eng., 33, 256-266.

65. V. Stobiac, M. Heniche, C. Devals, F. Bertrand and P.A. Tanguy, 2008. A Mapping Method Based on Gaussian Quadrature: Application to Viscous Mixing, accepted in Chemical Engineering Research and Design, 86, 1410-1422.

64. J. Doucet, F. Bertrand and J. Chaouki, 2008. A Measure of Mixing from Lagrangian Tracking and its Application to Granular and Fluid Flow Systems, Chemical Engineering Research and Design, 86, 1313-1321.

63. C. Bulle, F. Bertrand, R. Samson and L. Deschênes, 2008. Sensitivity Study of an OCDD Environmental Fate Screening Model in Soils in the Presence of PCP Wood-Preserving Oil, Chemosphere, 73, S149-157

62. B. Coesnon, M. Heniche, C. Devals, F. Bertrand and P.A. Tanguy, 2008. A Fast and Robust Fictitious Domain Method for Modelling Viscous Flows in Complex Mixers: the Example of Propellant Make-Down, Int. J. Num. Meth. Fluids, 58, 427-449.

61. J. Doucet, F. Bertrand, N. Hudon and J. Chaouki, 2008. Modeling of the Mixing of Monodisperse Particles Using a Stationary DEM-Based Markov Process, Comp. Chem. Eng., 32, 1334-1341.

60. J. Doucet, F. Bertrand and J. Chaouki, 2008. Experimental Characterization of the Chaotic Dynamics of Cohesionless Particles in a V-blender Using Radioactive Particle Tracking, Granular Matter, 10, 133-138.

59. J. Doucet, F. Bertrand and J. Chaouki, 2008. An Extended Radioactive Particle Tracking Method for Systems with Irregular Moving Boundaries, Powder Technology, 181, 195-204.

58. M. Lemieux, G. Léonard, J. Doucet, F. Viens, L.-A. Leclaire, J. Chaouki and F. Bertrand, 2008. Large-Scale Numerical Investigation of Solids Mixing in a V-Blender Using the Discrete Element Method, Powder Technology, 181, 205-216.

57. G. Léonard, F. Bertrand, J. Chaouki and P.M. Gosselin, 2008. An Experimental Investigation of Effusivity as an Indicator of Powder Blend Uniformity, Powder Technology, 181, 149-159.

56. J. Bouffard, H. Dumont, F. Bertrand and R. Legros, 2007. Optimization and Scale Up of a Fluid Bed Tangential Spray Rotogranulation Process, Int. J. Pharmaceutics, 335, 54-62.

55. S. Savarmand, M. Heniche, V. Béchard, F. Bertrand and P. J. Carreau, 2007. Analysis of the Vane Rheometer Using 3D Finite Element Simulation, Journal of Rheology, 51(2), 161-177.

54. M. Lemieux, F. Bertrand, J. Chaouki and P. Gosselin, 2007. Comparative Study of the Mixing of Free-Flowing Particles in a V-blender and a Bin-blender, Chem. Eng. Sci, 62, 1783-1802.

53. L. Fradette, P. A. Tanguy, F. Bertrand, F. Thibault, J.-B. Ritz and E. Giraud, 2007. CFD Phenomenological Model of Solid-Liquid Mixing in Stirred Vessels, Comp. Chem. Eng, 31, 334-345.

52. C. Devals, M. Heniche, F. Bertrand, P.A. Tanguy and R.E. Hayes, 2007. A Two-Phase Flow Interface Capturing Finite Element Method, Int. J. Num. Meth. Fluids, 53, 735-751.

51. Z. Zhang, P. G. Lafleur and F. Bertrand, 2006. Effect of Aerodynamics on Film Blowing Process, Int. Polym. Proc., 21(5), 527-535.

50. R. Litto, R.E. Hayes, H. Sapoudjiev, A. Fuxman, F. Forbes, B. Liu and F. Bertrand, 2006. Optimization of a Flow Reversal Reactor for the Catalytic Combustion of Lean Methane Mixtures, Catalysis Today, 117, 536-542.

49. S. Navaee-Ardeh, F. Bertrand and P. R. Stuart, 2006. Emerging Biodrying Technology for the Drying of Pulp and Paper Mixed Sludges, Drying Technology, 24, 863-878.

48. A. Iranshahi, M. Heniche, F. Bertrand and P.A. Tanguy, 2006. Numerical Investigation of the Mixing Efficiency of the Ekato Paravisc Impeller, Chem. Eng. Sci., 61, 2609-2617.

47. R. Giguère, F. Bertrand and P.A. Tanguy, 2006. A Three-Dimensional Mesh Refinement Strategy for the Simulation of Fluid Flow with a Fictitious Domain Method, Comp. Chem. Eng., 30, 453-466.

46. C. Devals C., M. Heniche, F. Bertrand, R.E. Hayes and P.A. Tanguy, 2005. A finite Element Strategy for the Solution of Interface Tracking Problems, Int. J. Num. Meth. Fluids, 49, 1305-1327.

45. J. Mmbaga, R. E. Hayes, F. Bertrand and P. A. Tanguy, 2005. Flow Simulation in the Nip of a Rigid Forward Roll Coater, Int. J. Num. Meth. Fluids, 48, 1041-1066.

44. F. Bertrand, L.-A. Leclaire and G. Levecque, 2005. DEM-Based Models for the Mixing of Granular Materials, Chem. Eng. Sci., 60, 2517-2531.

43. F. Bertrand, T. Gange, E. Desaulniers, D. Vidal and R.E. Hayes, 2004. Simulation of the Consolidation of Paper Coating Structures: Should One Use Probabilistic or Deterministic Models ?, Comp. Chem. Eng., 28, 2595-2604.

42. A. Fortin, F. Bertrand, M. Fortin, E. Chamberland, P.E. Boulanger-Nadeau, A. El Maliki and N. Najeh, 2004. An Adaptive Remeshing Strategy for Shear-Thinning Fluid Flow Simulations, Comp. Chem. Eng., 28, 2363-2375

41. R.E. Hayes, F. Bertrand, C. Audet and S.T. Kolaczkowski, 2003. Catalytic Combustion Kinetics: Using Light-Off Curves to Evaluate Kinetic Parameters, Can. J. Chem. Eng., 81, 1192-1199.

40. S. Savarmand, P. J. Carreau, F. Bertrand, D. J.-E. Vidal and M. Moan, 2003. Rheological Behavior of Aqueous Silica Suspensions, J. Rheol., 47(5), 1133-1149.

39. S. Alonso, F. Bertrand and P. A. Tanguy, 2003. A Torque-Based Analysis of the Reverse Roll Coating Process Stability, Chem. Eng. Sci., 58, 1831-1837.

38. F. Bertrand, F. Thibault, L. Delamare and P.A. Tanguy, 2003. Adaptive Finite Element Simulations of Fluid Flow in Twin-Screw Extrusion, Comp. Chem. Eng., 27, 491-500.

37. S. Fourmanoit, R. Roy and F. Bertrand, 2002. Towards Best Achievable Floating Point Performance on Linear Algebra Computations for COTS Beowulf Clusters, in Applications of High-Performance Computing in Engineering VII, WIT Press, 3-12 .

36. F. Bertrand and P. A. Tanguy, 2002. Krylov-Based Uzawa Algorithms for the Solution of the Stokes Equations Using Discontinuous Pressure Tetrahedral Finite Elements, J. Comp. Phys., 181, 617-638.

35. E. Brito, F. Bertrand, P.J. Carreau and P.A. Tanguy, 2001. Mixing of Viscoelastic Fluids, in Engineering and Food for the 21st Century, Technomic Pub. Co, 347-360 (Book chapter).

34. P.A. Tanguy, F. Bertrand, F. Thibault and P. Galy-Jammou, 2001. Polymer Melt Mixing: Modeling in 3D, The Encyclopedia of Materials Science and Technology, Elsevier, 7425-7428 (Book chapter).

33. S. Alonso, F. Bertrand and P. A. Tanguy, 2001. A CFD Assessment of Film Coating Process Viscosity Models, Can. J. Chem. Eng., 79, 751-759.

32. S. Alonso, F. Bertrand, O. Réglat, L. Choplin and P. A. Tanguy, 2001, Process Viscosity in Reverse Roll Coating, Trans. IChEME Journal, 79, Part A, 128-136.

31. J.-B. Ritz, F. Bertrand, F. Thibault and P. A. Tanguy, 2000. Shear-Induced Particle Migration in a Short-Dwell Coater, Chem. Eng. Sci., 55, 4857-4867.

30. R. E. Hayes, F. Bertrand and P. A. Tanguy, 2000. Modelling of Fluid/Paper Interaction in the Application Nip of a Film Coater, Transport in Porous Media, 40, 55-72.

29. S. Alonso, P.A. Tanguy, O. Réglat and F. Bertrand, 2000. Process Viscosity in a Film Coater, Paperi ja Puu, 82 (1), 34-40.

28. E. Fourcade, F. Bertrand, O. Réglat and P. A. Tanguy, 1999. Finite Element Analysis of Fluid-Solid Interaction in the Metering Nip of a Metering Size Press, Comp. Meth. Appl. Mech. Eng., 174, 235-245.

27. F. Bertrand, P. A. Tanguy, E. Brito de la Fuente and P. Carreau, 1999. Numerical Modeling of the Mixing Flow of Second-Order Fluids with Helical Ribbon Impellers, special issue on Advances in Computational Methods for Non-Newtonian Flows, Comp. Meth. Appl. Mech. Eng., 180, 267-280.

26. P. A. Tanguy, F. Bertrand, F. Thibault, F. Fages, M. Lamotte, E. Giraud and M.-H. Fages, 1998. Mécanismes de malaxage dans un malaxeur bipale à mouvement planétaire: simulation numérique 3D et étude expérimentale par traçage fluorimétrique, Récents progrès en génie des procédés, 61, 43-48.

25. J. de la Villéon, F. Bertrand, P. A. Tanguy, R. Labrie, J. Bousquet and D. Lebouvier, 1998. Numerical Investigation of Mixing Efficiency of Helical Ribbons, AIChE J., 44, 972-977.

24. D. Vidal, F. Bertrand and P. A. Tanguy, 1998. Numerical Simulation of the Hydrodynamics in a Short-Dwell Coater, Chem. Eng. Sci, 53, 1991-2003.

23. P. A. Tanguy, J. de la Villeon, R. Labrie, J. Bousquet, D. Lebouvier and F. Bertrand, 1997. Evaluation of Macromixing in a Mechanically Agitated Vessel Using Chaos Analysis, Récents Progrès en Génie des Procédés, 51, 259-264.

22. L. Davoust, R. Moreau, M. D. Cowley, P. A. Tanguy and F. Bertrand, 1997. Numerical and Analytical Modelling of the MHD Buoyancy-Driven Flow in a Bridgman Crystal Growth Configuration, J. Crystal Growth, 180, 422-432.

21. F. Bertrand, P. A. Tanguy and F. Thibault, 1997. A 3D Fictitious Domain Method for Incompressible Fluid Flow Problems, Int. J. Num. Meth. Fluids, 25, 719-736.

20. P. A. Tanguy, F. Bertrand, R. Labrie and E. Brito-De La Fuente, 1996. Numerical Modelling of the Mixing of Viscoplastic Slurries in a Twin-Blade Planetary Mixer, Chem. Eng. Res. Des., 74, 499-504.

19. E. Mickaily Huber, F. Bertrand, P. A. Tanguy, T. Meyer, A. Renken, F. Rys and M. Wehrli, 1996. Numerical Simulations of Flow in an SMRX Static Mixer, Chem. Eng. J., 63, 117-126.

18. F. Bertrand, P. A. Tanguy and E. Brito-De La Fuente, 1996. A New Perspective for the Mixing of Yield Stress Fluids With Anchor Impellers, J. Chem. Eng. Jpn, 29, 51-58.

17. P. A. Tanguy, F. Bertrand, R. Labrie, E. Brito-De La Fuente and M. H. Fages, 1995. Étude numérique du malaxage de fluides chargés dans un malaxeur bipale à mouvement planétaire, Récents progrès en génie des procédés, 38, 87-92.

16. K. K. Kabanemi, F. Bertrand, P. A. Tanguy and A. A. Aït Kadi, 1994. A Pseudo-Transient Finite Element Method for the Resolution of Viscoelastic Fluid Flow Problems With the Method of Characteristics, J. Non-Newt. Fluid Mech., 55, 283-305.

15. P. A. Tanguy, F. Bertrand and E. Brito-De La Fuente, 1994. Mixing of Viscoplastic Fluids With Anchor Impellers, I. Chem. E. Symp. Series, 136, 525-532.

14. F. Bertrand, F. Thibault, P. A. Tanguy and L. Choplin, 1994. 3D Modelling of the Mixing of Highly Viscous Polymers With Intermeshing Impellers. AIChE Symp. Series no. 299, Process Mixing - Chemical and Biochemical Applications, G. Tatterson and R. Calabrese Eds, 106-116. AIChE 1993 Annual Meeting Outstanding Paper Award.

13. F. Bertrand, P. A. Tanguy and F. Thibault, 1994. A Numerical Study of Residence Time Distribution in Static Mixers. I. Chem. E. Symposium Series, 136, 163-170.

12. P. A. Tanguy, R. Lacroix, F. Bertrand, L. Choplin and E. Brito-De La Fuente, 1992. Mixing of non-Newtonian Viscous Fluids with Helical Impellers : Experimental and 3D Numerical Studies. AIChE Symp. Series no. 286 : Process Mixing - Chemical and Biochemical Applications, G. Tatterson et R. Calabrese Eds., 33-37.

11. P. A. Tanguy, R. Lacroix, F. Bertrand, L. Choplin and E. Brito-De La Fuente, 1992. Finite Element Analysis of Viscous Mixing with an Helical Ribbon Screw Impeller. AIChE J., 38, 939-944. (Highlighted in Chem. Eng. Progress 88(6), 14, June 1992).

10. F. Bertrand, M. Gadbois and P. A. Tanguy, 1992. Tetrahedral Elements for Fluid Flow. Int. J. Num. Meth. Eng., 33, 1251-1267 .

09. F. Bertrand and P. A. Tanguy, 1992. Parallel Finite Element Computations on a Network Using NCS™, AICHE J., 38, 251-258 .

08. F. Bertrand, R.E. Hayes and P. A. Tanguy, 1991. A Decomposed Crouzeix-Raviart Element for the Finite Element Solution of the Navier-Stokes Equations. Int J. Num. Meth. Fluids, 13, 1073-1083.

07. P. A. Tanguy, R. Lacroix, F. Bertrand, L. Choplin and E. Brito-De La Fuente, 1991. Mixing of Rheologically Complex Fluids with an Helical Ribbon Screw Impeller : Experimental and 3D Numerical Results. MIXING 7, KVI (Belgique), 507-514.

06. P. Hurez, P. A. Tanguy and F. Bertrand, 1991. A Finite Element Analysis of Die Swell with Pseudoplastic and Viscoplastic Fluids. Comp. Meth. Appl. Mech., 86, 87-103.

05. R. Lacroix, F. Bertrand, P. A. Tanguy, L. Choplin and E. Brito-De La Fuente, 1989. Modélisation tridimensionnelle de l'agitation dans un réacteur muni d'une turbine HRS, Récents progrès en génie des procédés, Lavoisier, III, 92-98.

04. P. A. Tanguy, A. Fortin and F. Bertrand, 1988. A Three-dimensional Finite Element Model for Polymer Melt Flow. Adv. Polym. Tech., 8, 99-113.

03. F. Bertrand and P. A. Tanguy, 1988. Graphical Representation of Two-Dimensional Fluid Flow by Stream Vectors. Comm. Appl. Num. Meth., 4, 213-218.

02. A. Soulaimani, M. Fortin, G. Dhatt, Y. Ouellet and F. Bertrand, 1987. Simple Continuous Pressure Elements for Two- and Three-dimensional Incompressible Flows. Comp. Meth. Appl. Mech. Eng., 1, 47-69.

01. C.H. Ung and F. Bertrand, 1987. Analyse qualitative des équations différentielles d'un modèle de croissance pour l'érablière à sucre. Can. J. For. Res., 17, 588-593.









Compterendus avec comité de lecture

30. L. Spreutels, F. Debaste, C. Heilporn, R. Legros, J. Chaouki, F. Bertrand and B. Haut, 2010. Development of a Measurement Technique for Particle Shrinkage During Convective Drying, 17th International Drying Symposium, Magdeburg, Germany, 157-164.

29. D. Vidal, C. Ridgway, G. Pianet, J. Schoelkopf, R. Roy and F. Bertrand, 2008. Effect of Particle Size Distribution and Packing Compression on Fluid Permeability: a Comparison of Experiments and Monte-Carlo/Lattice-Boltzmann Simulations, Fundamental and Applied Pulp & Paper Modelling Symposium, Trois-Rivières, Canada, ISBN-13978-2-9808323-5-2, 201-219.

28. F. Drolet, D. Vidal, I. Vadeiko and F. Bertrand, 2008. Modelling the Flow of Airborne Particles Through Random Fibre Networks, Fundamental and Applied Pulp & Paper Modelling Symposium 2008, Trois-Rivières, Canada, ISBN-13978-2-9808323-5-2, 189-200.

27. G. Pianet, F. Bertrand, D. Vidal and B. Mallet, 2008. Modeling the Compression of Particle Packings Using the Discrete Element Method, TAPPI Advanced Coating Fundamentals Symposium, Montreal, Canada, ISBN-1-59510-174-8.

26. D. Vidal, C. Ridgway, G. Pianet, J. Schoelkopf, R. Roy and F. Bertrand, 2008. Effect of Particle Size Distribution and Packing Compression on Fluid Permeability: a Comparison of Experiments and Monte-Carlo/Lattice-Boltzmann Simulations, TAPPI Advanced Coating Fundamentals Symposium, Montreal, Canada, ISBN-1-59510-174-8 (Best Paper Award).

25. S. Navaee-Ardeh, F. Bertrand, P.R. Stuart, 2008. Distributed Model of a Continuous Biodrying Process for Drying Pulp and Paper Mixed Sludge and Comparison with Experimental Results, Control Systems-Pan Pacific Conference, Vancouver, Canada, 51-52.

24. S. Savarmand, P.J. Carreau, F. Bertrand and D. Vidal, 2008. Models for the Rheology of Clay-GCC Coating Colors, TAPPI Advanced Coating Fundamentals Symposium, Montreal, Canada, ISBN-1-59510-174-8.

23. J. Doucet, J. Maille, J. Chaouki and F. Bertrand, 2007. Effect of time integration error on accuracy of granular mixing simulations with the discrete element method, PARTEC, Nuremberg, Germany.

22. H.A. Lécuyer, F.H. Bertrand, P.A. Tanguy, J.P. Mmbaga and R.E. Hayes, 2006. Computer Modelling of Deformable non-Newtonian Flow Using Comsol Multiphysics, COMSOL User Conference, Las Vegas, USA.

21. C. Devals, A. Fuxman, F. Bertrand, J.F. Forbes and R.E. Hayes, 2006. Combustion of Lean Methane in a Catalytic Flow Reversal Reactor, COMSOL Users Conference, Boston, USA.

20. J. Doucet, F. Bertrand and J. Chaouki, 2006. Experimental Characterization of the Chaotic Dynamics of Cohesionless Particles in a V-blender Using Radioactive Particle Tracking, 5th World Congress on Particle Technology, Orlando, USA.

19. M. Lemieux, F. Bertrand, J. Chaouki and P. Gosselin, 2006. Experimental and Numerical Comparative Study of Cohesionless Granular Mixing in a Bin-Blender and a V-Blender, 5th World Congress on Particle Technology, Orlando, USA.

18. D. Vidal and F. Bertrand, 2006. Recent progress and Challenges in the Numerical Modeling of Coating Structure Development, TAPPI 9th Advanced Coating Fundamentals Symposium, Turku, Finland.

17. S.S. Manski, J.P. Mmbaga, R.E. Hayes, F. Bertrand and P.A. Tanguy, 2005. Simulation of Roll Coating Process Using FEMLAB, FEMLAB Conference 2005, Boston, USA.

16. E. Desaulniers, F. Bertrand, L.-A. Leclaire and D. Vidal, 2005. Numerical Modeling of Granular Flow with the Discrete Element Method : Application to Pigment Consolidation in paper Coating Process, 4th International Conference on CFD in the Oil, Gas, Metallurgical and Process Industries, Trondheim, Norway.

15. J.P. Mmbaga, R.E. Hayes, F. Bertrand and P.A. Tanguy, 2004. Numerical Simulation of High Speed Roll Coating with Deformable Rolls, 12th Coating Sci. and Tech. Symp., Rochester, New York, USA.

14. C. Devals, M. Heniche, F. Bertrand, P.A. Tanguy and R.E. Hayes, 2004. A Finite Element Solver for the Advection Equation Applied to Interface Tracking, Numiform, Rochester, USA.

13. C. Devals, M. Heniche, F. Bertrand, P.A. Tanguy and R.E. Hayes, 2004. A Filtering Technique for Solving the Advection Equation in Two-Phase Flow Problems, CFD 2004, Ottawa.

12. F. Bertrand, R. Giguère and P.A. Tanguy, 2003. Recent Progress on the Modeling of Complex Flows in Twin-Screw Extrusion, in Computational Fluid and Solid Mechanics, 843-846, MIT, Cambridge, USA.

11. S. Fourmanoit, F. Bertrand and R. Roy, 2003. An Efficient Parallel Strategy for the Simulation of Particle Sedimentation, 17th Annual International Symposium on High Performance Computing Systems and Applications, Sherbrooke, Canada.

10. F. Bertrand, E. Desaulniers, T. Gange and D. Vidal, 2002. Numerical Models for the Packing of Blends of Spherical Pigments in Paper Coating, 11th Int. Conf. Coating Sci. and Tech. Symp., St-Paul, Minnesota, USA.

09. F. Bertrand, J.-B. Ritz, P.A. Tanguy and E. Giraud, 2001. Simulation of Shear-Induced Particle Migration in Stirred Tanks, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

08. F. Thibault, F. Bertrand, P.A. Tanguy and L. Delamare, 2000. A Local Refinement Based Fictitious Domain Method : Application to the Simulation of Fluid Flow in a Twin-Screw Extruder, CFD 2000, Montréal.

07. P. A. Tanguy, S. Alonso, O. Réglat and F. Bertrand, 1999. Process Viscosity in a Film Coater, International Symposium on Paper Coating Coverage, Helsinki.

06. P. A. Tanguy, F. Bertrand, F. Thibault and P. Galy-Jammou, 1999. Simulation of Kneading Mechanisms in a Three-Blade Planetary Mixer, 3rd International Symposium on Mixing in Industrial Processes, Osaka, Japan.

05. E. Fourcade, F. Bertrand and P. A. Tanguy, 1998. Numerical Modeling of the Hydrodynamics in the Metering Nip of a Film Coater, CFD 98, Québec.

04. J. B. Ritz, F. Bertrand, F. Thibault and P. A. Tanguy, 1998. Numerical Modeling of Shear-Induced Migration in a Film Coater, CFD 98, Québec.

03. P. A. Tanguy, J. de la Villéon, R. Labrie, J. Bousquet, D. Lebouvier and F. Bertrand, 1997. Evaluation of Macromixing in a Mechanically Agitated Vessel Using Chaos Analysis, 9th European Conference on Mixing, Paris.

02. D. Pelletier, A. Garon, A. Fortin, F. Bertrand and P. A. Tanguy, 1989. Natural Finite Elements for 3D Incompressible Viscous Flows. 6th Int. Conf. on Num. Meth. in Laminar and Turbulent Flow, Swansea, 1803-1814.

01. P. A. Tanguy, F. Bertrand, M. Gadbois et M.P. Robichaud, 1988. Advanced Finite Element Software for Polymer Processing. 4th Int. Symp. on Sci. and Eng. on Cray Supercomputers, Minneapolis, 463-486, 580-583.



Rapports internes

03. F. Bertrand, T. Gange, E. Desaulniers, D. Vidal and R.E. Hayes, 2004. Simulation of the Consolidation of Paper Coating Structures : Probabilistic vs. Deterministic Models, Paprican University Report 854.

02. J. Mmbaga, R. E. Hayes, F. Bertrand and P. A. Tanguy, 2004. Simulation of Hydrodynamics in a Forward Roll Coater, Paprican University Report 847.

01. S. Savarmand, P. J. Carreau, F. Bertrand, D. J.-E. Vidal and M. Moan, 2003. Rheological Properties of Concentrated Aqueous Silica Suspensions: Effects of pH and Ions Content, Paprican University Report 837.

Articles d'intérêt general

03. P. A. Tanguy, R. Lacroix and F. Bertrand. Modelling Complex Fluid Flow with Finite Elements. Cray Channels, Fall 1989.

02. P. A. Tanguy and F. Bertrand. De la recherche aux applications industrielles : ingénierie assistée par ordinateur. Le Québec industriel, février 1988.

01. P. A. Tanguy and F. Bertrand. Un super-ordinateur au Québec ? Notre avenir en dépend. Le Québec industriel, février 1988.

Invitation à des conférences

28. I. Belot, D. Vidal, R. Greiner, M. Votsmeier, B. van Setten, R.E. Hayes, F. Bertrand, 2018. On the Impact of Washcoat Distribution on the the Performance of Three-Way Catalyst Filters, 11th International Congress on Catalysis and Automotive Pollution Control, Brussels, Belgium.

27. F. Bertrand, 2018. Combined Use of Simulation and Experimentation for Better Understanding Solid-Liquid Mixing, 16th European Conference on Mixing, Toulouse, 2018.

26. S. Shu, F. Bertrand and J. Chaouki, 2018. Design, Optimization and Scale-up of Photobioreactor with CFD, New Frontiers in Multiphase CFD for the 21st Century Mix, Oaxaca, Mexico.

25. I. Belot, D. Vidal, R.E. Hayes, B. van Setten, M. Votsmeier and F. Bertrand, 2018. Optimizing the Performance of Engine Exhaust After-Treatment System Using Numerical Simulation, New Frontiers in Multiphase CFD for the 21st Century Mix, Oaxaca, Mexico.

24. D. Vidal and F. Bertrand, 2016. Lattice Boltzmann Models for Industrial Porous Media Flows, Mathias 2016, Paris, France.

23. F. Bertrand and B. Blais, 2016. Development of a Novel CFD-DEM Model for Understanding Solid-Liquid Mixing, Mathias 2016, Paris, France.

22. D. Vidal and F. Bertrand, 2016. Revisiting the Classical Porous Media Theory Using Lattice Boltzmann Simulations, EPIC – Enabling Process Innovation by Computation, Banff, Canada.

21. F. Bertrand and B. Blais 2016. Development of a Novel CFD-DEM Model for Understanding Solid-Liquid Mixing, EPIC – Enabling Process Innovation by Computation, Banff, Canada.

20. F. Bertrand, 2014. A Mix of Computational Techniques for a Better Blend, D.B. Robinson Speaker Series, University of Alberta.

19. F. Bertrand, 2010. A Mix of Computational Techniques for a Better Blend, NAMF Mixing XXII Conference, Victoria, Canada.

18. F. Bertrand, 2010. Une mixture de techniques numériques pour un meilleur mélange, Adaptation de maillages et estimation d’erreurs, Journée en hommage à Michel Fortin, Conférence CRM-GIREF, Québec, Canada.

17. F. Bertrand, 2010. A Few Models for the Simulation of Particulate Flows, 1st Workshop on Industrial Multifluid Flows, Paris, France.

16. F. Bertrand, 2009. A Mix of Computational Techniques for a Better Blend, CREPEC Annual Meeting, Montreal, Canada.

15. F. Bertrand, 2009. A Mix of Computational Techniques for a Better Blend, 8th World Congress of Chemical Engineering, Montreal, Canada.

14. F. Bertrand, 2009. The Modeling of Paper Coating Flows, 7th International Paper and Coating Chemistry Symposium, Hamilton, Ontario.

13. F. Bertrand, 2007. Fictitious Domain Methods for Real Fluid Flow Problems, 57th CSChE Conference, Edmonton, Canada.

12. F. Bertrand, Méthodes de domaines fictifs pour problèmes d’écoulements réels, 2004. Ecole MATMECA, Bordeaux, France.

11. F. Bertrand, Méthodes de domaines fictifs pour problèmes d’écoulements réels, 2004. ENS Cachan, Cachan, France.

10. F. Bertrand, 2004. Fictitious Domain Methods for Real Fluid Flow Problems, 2nd Annual Workshop on Computational Materials Science, Hamilton, Ontario.

09. F. Bertrand, 2004. Modélisation des écoulements granulaires en génie des procédés, Centre Intégré des Pâtes et Papier, UQTR, Trois-Rivières.

08. F. Bertrand, 2003. Modeling of Granular Flows in Process Engineering, Trends in Physical and Numerical Modeling of Multiphase Industrial Flows, 4th Edition, Cargese, France.

07. D. Vidal, E. Desaulniers, L.-A. Leclaire and F. Bertrand, 2003. Recent Progress and Challenges in the Numerical Modeling of Coating Structures, 5th International Paper and Coating Chemistry Symposium, Montreal, Canada.

06. F. Bertrand, 2002. Parallel Computing in CFD. IBM Linux Cluster Seminar, Montreal.

05. F. Bertrand, 2002. Parallel Computing in CFD. Second Annual Workshop on Building Commodity Clusters, Ottawa.

04. F. Bertrand, 2001. Simulation de l'écoulement de fluides visqueux en cuve agitée : de l'algorithme d'Uzawa aux exposants de Lyapounov. Laboratoire MASTER, ENSCPB, Université de Bordeaux I, Bordeaux, France.

03. F. Bertrand, 1996. Méthodes de domaine fictif : application à la préparation des sauces de couchage en génie papetier. Sixième journée des éléments finis, Montréal.

02. F. Bertrand, 1992. Calculs d'éléments finis en parallèle sur un réseau à l'aide de NCS™. Deuxième journée des éléments finis, Québec.

01. P. A. Tanguy, F. Bertrand, M. Gadbois and M. P. Robichaud, 1988. Advanced Finite Element Software for Polymer Processing. 4th Int. Symp. on Sci. and Eng. on Cray Supercomputers, Minneapolis, USA.



Conférences en milieu industriel

10. F. Bertrand, 2011. A Mix of Computational Techniques for a Better Blend and Better Processes, Procter & Gamble, Cincinnati.

09. F. Bertrand and J. Chaouki, 2007. Modeling the Mixing of Granular Materials with the Discrete Element Method: Development, Validation and Applications, Merck Frosst, Kirkland, QC, Canada.

08. F. Bertrand, 2006. Modélisation des écoulements granulaires en génie des procédés. Institut des Matériaux Industriels, Boucherville.

07. F. Bertrand, 2003. Modeling Strategies for Fluid Flow in Porous Media. Procter & Gamble, Cincinnati, USA.

06. F. Bertrand, 2001. Méthodes novatrices pour la simulation en génie des procédés. Institut des Matériaux Industriels, Boucherville.

05. F. Bertrand, 2001. Simulation de l'écoulement de fluides visqueux en génie des procédés : application au mélange de fluides rhéologiquement complexes. EDF, Chatou, France.

04. F. Bertrand, 1999. R&D in Paper Coating Engineering, Paprican Research Center, Montreal.

03. P. A. Tanguy and F. Bertrand, 1988. Finite Element Modelling of Injection Molding and Extrusion: the 3D case. Control Data GMBH, Frankfurt, Germany.

02. P. A. Tanguy and F. Bertrand, 1988. Modélisation par éléments finis du moulage par injection et de l'extrusion: le cas 3D. Control Data France, Marne-La-Vallée, France.

01. P. A. Tanguy and F. Bertrand, 1988. Modélisation par éléments finis du moulage par injection et de l'extrusion: le cas 3D. Centre de Rhônes-Poulenc Fibres, Vénissieux, France.

Présentation à des conférences


182. S. Leclaire, D. Vidal, L. Fradette and F. Bertrand, 2018. Lattice Boltzmann Modeling of Immiscible Liquid-Liquid Flows in Static Mixers, Mixing XXVI, San Juan, Porto Rico, USA.

181. I. Belot, D. Vidal, R.E. Hayes, B. van Setten, M. Votsmeier and F. Bertrand, 2017. Numerical Investigation of the Impact of Washcoat Deposition on the Performance of Particulate Filters, 10th World Congress of Chemical Engineering, Barcelona, Spain.

180. I. Belot, D. Vidal, R.E. Hayes, B. van Setten, M. Votsmeier and F. Bertrand, 2017. Numerical Investigation of the Impact of Washcoat Deposition on the Performance of Particulate Filters, Modegat V, Karslruhe, Germany.

179. S. Shu, R. Demol, F. Bertrand, P.A. Tanguy and J. Chaouki, 2017. Compartmental Modelling of Bubble Column Reactor Based on Computational Fluid Dynamics, Formula IX, Beijing, China.

178. J.-M. Tucny, D. Vidal, F. Drolet and F. Bertrand, 2017. Numerical Study of the Impact of Multi-Layering on the Permeability and Capture Efficiency of Fibrous Air Filters, CFD2017, Windsor, Canada.

177. M. Rasouli, F. Bertrand and J. Chaouki, 2016. Differences in the Dynamics of Cylindrical and Spherical Particles in a Rotating Drum Using Multiple Radioactive Particle Tracking, AIChE Annual Meeting, San Francisco, USA.

176. B. Blais and F. Bertrand, Viscous Solid-Liquid Mixing in Agitated Vessels via CFD-DEM Simulation: Suspension Dynamics and Influence of the Geometry, AIChE Annual Meeting, San Francisco, USA.

175. O. Bertrand, B. Blais, F. Bertrand and L. Fradette, 2016. Development of Pressure Based Methods for the Determination of the Just-Suspended Speed and Suspension State in Viscous Solid-Liquid Mixing, CSChE Annual Meeting, Quebec City.

174. O. Bertrand, B. Blais and L. Fradette, 2016. Development of Pressure Based Methods for the Determination of the Just-Suspended Speed and Suspension Sate in Viscous Solid-Liquid Mixing, Mixing XXV, Quebec City.

173. C. Beaulieu, J. Chaouki and F. Bertrand, 2016. Influence of Granular Segregation on Heat Transfer in a Rotary Kiln, Mixing XXV, Quebec City.

172. B. Blais, O. Bertrand, M. Lassaigne, L. Fradette and F. Bertrand, 2016. Understanding Solid-Liquid Mixing Through the Development of a Novel CFD-DEM Model, Mixing XXV, Quebec City.

171. D. Vidal, J.-M. Tucny, F. Drolet and F. Bertrand, 2016. Revisting Davies’ Correlation for Porous Media Made of Polydisperse Fibers Based on Lattice Boltzmann Simulations, 8th Int. Conf. on Porous Media, Cincinnati, USA.

170. F. Bertrand, B. Blais, M. Lassaigne, L. Fradette and C. Goniva, 2016. A CFD-DEM Model for Viscous Solid-Liquid Mixing in Stirred Tanks, AIChE Annual Meeting, Salt Lake City, USA.

169. R. Legros, P. Farand, M. Perrier, F. Bertrand, C. Dubois and D. Klvana, 2015. Horizontal Integration of Core Courses in Chemical Engineering : 10 years after, 2015, 65th CSChE Annual Meeting, Calgary, Canada.

168. J.-M. Tucny, D. Vidal, F. Bertrand and F. Drolet, 2015. Prediction of the Impact of Fiber Polydispersity on Filter Efficiency, 65th CSChE Annual Meeting, Calgary, Canada.

167. C. Beaulieu, F. Bonniol, J. Chaouki and F. Bertrand, 2015. Use of Collision and Flow Properties of Particles Falling From a Hopper to Estimate the Damping Coefficient in the DEM, Particles, Barcelona, Spain.

166. B. Blais, M. Lassaigne, C. Goniva, L. Fradette and F. Bertrand, 2015. Design and Validation of a Robust CFD-DEM Model for the Investigation of Viscous Solid-Liquid Mixing in Agitated Vessels, Particles, Barcelona, Spain.

165. B. Blais, M. Lassaigne, C. Goniva, L. Fradette and F. Bertrand, 2015. A Robust and Efficient CFD-DEM Model for the Investigation of Viscous Solid-Liquid Mixing in Stirred Tanks, 10th European Conference on Chemical Engineering, Nice, France.

164. D. Vidal, G. Matte-Deschênes, F. Bertrand and R.E. Hayes, 2015. Simulation of the Impact of Thermophoresis on the Capture Efficiency of Diesel Particulate Filters, Modegat IV, Karslruhe, Germany.

163. B. Blais, M. Lassaigne, C. Goniva, L. Fradette and F. Bertrand, 2015. Investigation of Viscous Solid-Liquid Mixing in Agitated Vessels Using CFD-DEM: Model Formulation and Experimental Validation, 10th OpenFOAM Workshop, Ann Harbor, Michigan, USA.

162. H. Bashiri, F. Bertrand and J. Chaouki, 2015. Development of a Multiscale Model for the Design and Scale-up of Gas-Liquid Stirred Tank Reactors, 2nd International Conference on Multiscale Computational Methods for Solids and Fluids, Sarajevo, Boznia and Herezegovina.

161. B. Blais, F. Bertrand, 2015. Strategies for the CFD-DEM Simulation of Dense Suspensions in Stirred Tanks, 27th International Conference on Parallel Computational Fluid Dynamics (PARCFD), Montreal Canada.

160. B. Blais, M. Lassaigne, L. Fradette and F. Bertrand, 2014. Multiscale CFD-DEM Modeling of the Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks, AIChE Annual Meeting, Atlanta, USA.

159. G. Matte-Deschênes, D. Vidal, F. Bertrand and R.E. Hayes, 2014. Simulation of the Impact of Thermophoresis on the Efficiency of Diesel Particulate Filters, CSChE Annual Meeting, Niagara Falls, Canada.

158. M. Lassaigne, B. Blais, I. Ayranci, F. Bertrand and L. Fradette, 2014. Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks, CSChE Annual Meeting, Niagara Falls, Canada.

157. B. Blais, M. Lassaigne, L. Fradette and F. Bertrand, 2014. Robust Modeling of Viscous Solid-Liquid Mixing in Stirred Tanks via a Euler-Lagrange Approach, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

156. D. Dubé, F. Bertrand, F. Guibault and J. Chaouki, 2014. Efficient Parallelization of the Radioactive Particle Tracking Technique on GPU, High-Performance Computing Symposium, Halifax, Canada.

155. M. Lassaigne, B. Blais, I. Ayranci, L. Fradette and F. Bertrand, 2014. Mixing of Viscous Liquids and Large Concentrations of Spherical Particles in Stirred Tanks, Mixing XXIV, Lake George, NY, USA.

154. H. Bashiri, F. Bertrand and J. Chaouki, 2014. Development of a Multi-Scale Model for the Design and Scale-Up of Gas/Liquid Stirred Tank Reactors, Mixing XXIV, Lake George, NY, USA.

153. S. Douieb, L. Fradette, F. Bertrand and B. Haut, 2014. Impact of Agitation on the Growth Rate of CO2 Gas Hydrates in a Semi-Batch Stirred Tank Reactor, Mixing XXIV, Lake George, NY, USA.

152. J. Chaouki and F. Bertrand, 2014. Mixing Index and Restitution Coefficient: New Definitions and New Measurement Methods, World Congress of Particle Technology, Beijing, 2014.

151. H. Bashiri, E. Alizadeh, F. Bertrand, J. Chaouki and M. Heniche, 2013. Investigation of Single and Multiphase Fluid Flow Behavior in Stirred Tanks by Means of CFD and Radioactive Particle Tracking, AIChE Annual Meeting, San Francisco, USA.

150. M. Rasouli, F. Bertrand and J. Chaouki, 2013. A Multiple Radioactive Particle Tracking Technique for Mixing Applications, AIChE Annual Meeting, San Francisco, USA.

149. B. Blais and F. Bertrand, 2013. Towards the Combination of Modeling Strategies for Solid-Liquid Mixing, AIChE Annual Meeting, San Francisco, USA.

148. S. Douieb, L. Fradette and F. Bertrand, 2013. Impeller Geometry Effect on the Growth Rate of CO2 Gas Hydrates in Agitated Vessels, CSChE Conference, Fredericton.

147. L. Spreutels, R. Legros, J. Chaouki, F. Bertrand and B. Haut, 2013. Modeling of Conical Spouted Bed Drying Using a Multiscale Approach, CSChE Conference, Fredericton.

146. S. Douieb, L. Fradette, F. Bertrand and B. Haut, 2013. Impeller Geometry Effect on the Growth Rate of CO2 Gas Hydrates in Agitated Vessels, 9th World Congress of Chemical Engineering, Seoul, Korea.

145. L. Spreutels, B. Haut, J. Chaouki, F. Bertrand and R. Legros, 2013. Multiscale Modeling of Conical Spouted Bed Drying Applied to Baker’s Yeast, 9th World Congress of Chemical Engineering, Seoul, Korea.

144. E. Alizadeh, O. Dubé, F. Bertrand and J. Chaouki, 2013. Validation of Discrete Element Based Models for the Simulation of Granular Flows, 9th World Congress of Chemical Engineering, Seoul, Korea.

143. J. Bouffard, J. Chaouki and F. Bertrand, 2012. A Multiscale Model for the Granulation of Powders in a Spheronizer, AIChE Annual Meeting, Pittsburgh, USA (Best Presentation Paper).

142. E. Alizadeh, F. Bertrand and J. Chaouki, 2012. Development of an Accurate Granular Normal Contact Force Model Based on a Non-Newtonian Liquid Filled Dashpot, AIChE Annual Meeting, Pittsburgh, USA.

141. J. Olmiccia, M. Heniche and F. Bertrand, 2012. Prediction of the Residence Time Distribution in a Twin-Screw Extruder Based on Particle Tracking and an Original CFD Meshing Technique, CSChE Conference, Vancouver.

140. E. Alizadeh, H. Hajhashemi, F. Bertrand and J. Chaouki, 2012. Investigation of End Wall Effects on Axial Segregation in a Rotating Drum, CSChE Conference, Vancouver.

139. Y. Guntzburger, A. Fontaine, F. Bertrand, L. Fradette and R. Yatomi, 2012. Global Pumping Efficiency and Flow Dynamics of a Maxblend Impeller System with Newtonian and non-Newtonian Fluids, CSChE Conference, Vancouver.

138. L. Spreutels, J. Chaouki, F. Bertrand, R. Legros and B. Haut, 2012. Solid Trajectories and Residence Time Distribution in Conical Spouted Beds: Effect of Static Bed Height, Air Inlet Velocity and Draft Tube, CSChE Conference, Vancouver.

137. J. Bouffard, J. Chaouki and F. Bertrand, 2012. Flow, Mixing and Granulation of Powders in Rotor-Based Equipment, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

136. H. Bashiri, E. Alizadeh, F. Bertrand and J. Chaouki, 2012. Radioactive Particle Tracking (RPT) Technique for the Validation of Models for Multiphase Reactors, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

135. J. Bouffard, J. Chaouki and F. Bertrand, 2012. Towards a Complete Model for the Flow, Mixing and Granulation of Powders in Rotor-Based Equipment, Mixing XXIII Conference, Cancun, Mexico.

134. E. Alizadeh, H. Bashiri, F. Bertrand and J. Chaouki, 2012. Characterization of Mixing Processes by Radioactive Particle Tracking, Mixing XXIII Conference, Cancun, Mexico.

133. A. Fontaine, Y. Guntzburger, F. Bertrand, L. Fradette, M.-C. Heuzey and R. Yatomi, 2012. Experimental Investigation of the Flow Dynamics of Rheologically Complex Fluids in a Maxblend Impeller System, Mixing XXIII Conference, Cancun, Mexico.

132. L. Spreutels, R. Legros, F. Bertrand, B. Haut, C. Wylock and J. Chaouki, 2012. Ecoulement gaz-solide à jet conique: caractérisation par poursuite de particule radioactive, GLS6, Marrakech, Maroc.

131. O. Dubé, J. Chaouki and F. Bertrand, 2012. A Fast and Robust Method for the Discrete Element Simulation of Non-Spherical Granular Flows, 14th Asia Pacific Confederation of Chemical Engineering Congress, Singapore.

130. E. Alizadeh, F. Bonniol, J. Bouffard, O. Dubé, J. Chaouki and F. Bertrand, 2011. Efficient Modeling Tools for the Simulation of Industrial Granular Mixing Flows, Interamerican Congress of Chemical Engineering, Santiago, Chile.

129. L. Spreutels, J. Chaouki, F. Bertrand, B. Haut and R. Legros, 2011. Radioactive Characterization of the Gas Residence Time Distribution in Spouted Beds, 61st CSChE Conference, London, Canada.

128. E. Alizadeh, F. Bertrand and J. Chaouki, 2011. Discrete Element Simulation of Particle Mixing in a Saddle Blender, AIChE Annual Meeting, Minneapolis, USA.

127. O. Dubé, J. Chaouki and F. Bertrand, 2011. Dynamics of Monoshaped Non-Spherical Particles in a Cylindrical Tumbler, AIChE Annual Meeting, Minneapolis, USA.

126. J. Doucet, F. Bonniol, F. Bertrand and J. Chaouki, 2011. Measurement of Mixing Quality in Multiphase Systems, AIChE Annual Meeting, Minneapolis, USA.

125. E. Alizadeh, F. Bonniol, J. Bouffard, O. Dubé, J. Chaouki and F. Bertrand, 2011. Efficient Modeling Tools for the Simulation of Industrial Granular Mixing Flows, ISMIP7, Beijing, China.

124. C. Séguineau de Préval, C. Devals, F. Bertrand and R.E. Hayes, 2011. Towards the Direct Numerical Simulation of the Structured Catalytic Reactor: Lattice Boltzmann Simulation of Laminar Flow in a Honeycomb Monolith, MODEGAT II, Karlsruhe, Germany.

123. V. Stobiac, P.A. Tanguy and F. Bertrand, 2011. Lattice Boltzmann Simulation of Industrial Viscous Mixing Flows, 8th International Conference for Mesoscopic Methods in Engineering and Science, Lyon, France.

122. H. Bashiri, J. Chaouki, F. Bertrand and M. Heniche, 2011. CFD-based Compartmental Modelling of Stirred Tank Reactors, GLS10, Braga, Portugal.

121. V. Stobiac, P.A. Tanguy and F. Bertrand, 2011. Lattice Boltzmann Simulation of Industrial Viscous Mixing Flows, High-Performance Computing Symposium, Montreal.

120. M.P. Guerrero Palacios, D. Rochefort and F. Bertrand, 2011. Improving Large-Scale Immobilization of Enzymatic Biosensors by Microencapsulation, 94th Canadian Chemistry Conference, Montreal.

119. E. Alizadeh, F. Bertrand and J. Chaouki, 2010. Investigation of Mixing and Segregation of Granules in Tumbling Saddle Blender, 60th CSChE Conference, Saskatoon, Canada.

118. V. Stobiac, I. Chrétien, F. Bonniol, P. A. Tanguy, J. Chaouki and F. Bertrand, 2010. Efficient Modeling Paradigms for the Simulation of Industrial Mixing Flows, 13th Asia Pacific Confederation of Chemical Engineering Congress, Taipei, Taiwan.

117. L. Spreutels, F. Debaste, R. Legros, J. Chaouki, F. Bertrand and B. Haut, 2010. Shrinkage of Baker’s Yeast During Convective Drying: Measurement and Modeling, 19th International Congress of Chemical and Process Engineering, Prague, Czech Republic.

116. M. Lessard, D. Vidal and F. Bertrand, 2010. Effect of Particle Shape, Size Distribution and Packing Compression on Fluid Permeability as Predicted by Lattice-Boltzmann Simulations, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

115. V. Stobiac, P.A. Tanguy and F. Bertrand, 2010. Boundary Conditions for the Lattice Boltzmann Simulation of Industrial Viscous Mixing Flows, 7th International Conference for Mesoscopic Methods in Engineering and Science, Edmonton, Canada.

114. A. Fontaine, Y. Guntzburger, F. Bertrand and L. Fradette, 2010. Effect of Rheology on the Performance of Maxblend™ and Superblend™ Mixers, Mixing XXII Conference, Victoria, Canada.

113. J. Bouffard, J. Chaouki and F. Bertrand, 2010. An Investigation of the Mixing and Segregation of Powders in a Spheronizer, Mixing XXII Conference, Victoria, Canada.

112. M.P.G. Palacios, M. Ortmann, K. Rogers-Vallée, D. Rochefort, F. Bertrand and P. Mangin, 2010. Large Scale Coating of Microcapsules for Enzyme Immobilization in Bioactive Paper, 93rd Canadian Chemistry Conference, Toronto, Canada.

111. J. Bouffard, F. Bertrand and J. Chaouki. 2010. Control of Particle Cohesion by the Thermal Modification of Surface Properties, 6th World Congress of Particle Technology, Nuremberg, Germany.

110. S. Navaee-Ardeh, F. Bertrand and P.R. Stuart, 2009. Modeling and Experimental Verification of a Novel Biodrying Process for Drying Pulp and Paper Sludge, 8th World Congress of Chemical Engineering, Montreal, Canada.

109. E. Alizadeh, R. Legros, F. Bertrand and J. Chaouki, 2009. Comparison of Discrete Element Method Simulation with Experimental Data of Radioactive Particle Tracking in a Tumbling Cylinder, 8th World Congress of Chemical Engineering, Montreal, Canada.

108. M. Perreault, J. Chaouki and F. Bertrand, 2009. An Investigation of Magnesium Stearate Mixing Through Gamma-Ray Measurement, 8th World Congress of Chemical Engineering, Montreal, Canada.

107. J. Bouffard, F. Bertrand and J. Chaouki, 2009. Flow Patterns and Segregation with Toroidal Powder Motion, 8th World Congress of Chemical Engineering, Montreal, Canada.

106. O. Dubé, J. Bouffard, R. Legros, F. Bertrand and J. Chaouki, 2009. Dynamics of Mono-Shaped Non-Spherical Particles in a Cylindrical Tumbler, 8th World Congress of Chemical Engineering, Montreal, Canada.

105. M.P. Guerrero, P. Chu, S.J. Hashemi, M. Douglas, D. Rochefort and F. Bertrand, 2009. Coating of Enzymes for Development of Bioactive Paper, 7th International Paper and Coating Chemistry Symposium, Hamilton, Ontario.

104. D. Vidal and F. Bertrand, 2009. Numerical Modeling and Characterization of Coating Structures: Recent Progress and Challenges, Paper Making Research Symposium, Kuopio, Finland.

103. S. Navaee-Ardeh, C. Tchoryk, F. Bertrand, P.R. Stuart and B. Tolnai, 2008. Novel Continuous Biodrying Reactor: Principles, Screening Experiments and Results, 58th CSChE Conference, Ottawa, Canada.

102. J. Bouffard, F. Bertrand and J. Chaouki, 2008. Flow Patterns and Segregation with Toroidal Powder Motion, 58th CSChE Conference, Ottawa, Canada.

101. M. Perrault, J. Chaouki and F. Bertrand, 2008. A Study of Magnesium Stearate Lubrication Through Radioactivity Measurement, 58th CSChE Conference, Ottawa, Canada.

100. J. Doucet, O. Dubé, J. Bouffard, F. Bertrand and J. Chaouki, 2008. Experimental Measurement of Mixing Rates of Granular Materials Using a New Bulk Radioactive Tracking Method (BRPT), 2008. 1st Int. Conf. on Application of Intelligent Particles and Sensors in Environmental and Process Engineering, Penang, Malaysia.

99. V. Stobiac, M. Heniche, C. Devals, F. Bertrand and P.A. Tanguy, 2008. A Mapping Method Based on Gaussian Quadrature: Application to Viscous Mixing, 6th Int. Symp. on Mixing in Industrial Processes, Niagara-on-the-Lake, Canada.

98. J. Doucet, J. Bouffard, F. Bertrand and J. Chaouki, 2008. A Measure of Mixing from Lagrangian Tracking and its Application to Granular and Fluid Flow Systems, 6th Int. Symp. on Mixing in Industrial Processes, Niagara-on-the-Lake, Canada.

97. J. Doucet, J. Bouffard, O. Dubé, J. Chaouki and F. Bertrand, 2008. Investigation of Mixing of Fine Granular Ingredients Using a New Bulk Radioactive Particle Tracking Technique, Particulate Processes in the Pharmaceutical Industry, Porto Rico.

96. J. Doucet, O. Dubé, J. Bouffard, F. Bertrand and J. Chaouki, 2008. Modeling the Mixing of Granular Materials with the Discrete Element Method: Present and Future, Particulate Processes in the Pharmaceutical Industry, Porto Rico.

95. J. Doucet, F. Bertrand and J. Chaouki, 2007. Flow Structure Mapping of Segregating Granular Mixtures Using Radioactive Particle Tracking, AIChE Annual Meeting, Salt Lake City, USA.

94. J. Doucet, J. Chaouki and F. Bertrand, 2007. About the Time Step in DEM Simulations and its Effect on Granular Mixing Properties, AIChE Annual Meeting, Salt Lake City, USA.

93. S. Navaee-Ardeh, F. Bertrand and P.R. Stuart, 2007. 1-D Distributed Model of a Continuous Biodrying Process and Comparison with Experimental Results, 57th CSChE Conference, Edmonton, Canada.

92. S. Savarmand, P.J. Carreau, F. Bertrand and D. Vidal, 2007. Rheology of Clay-GCC Coating Colors, 79th Annual Meeting of the Society of Rheology, Salt Lake City, Utah, USA.

91. G. Pianet, D. Vidal, F. Bertrand, 2007. Development of a Hybrid DEM-LBM Model for Investigating Pigment Consolidation in Paper Coating Applications, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

90. D. Vidal, F. Bertrand and R. Roy, 2007. Development of an Efficient Lattice Boltzmann Method for Simulating Fluid Flow in Porous Media, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

89. B. Coesnon, M. Heniche, V. Stobiac, F. Bertrand and P.A. Tanguy, 2007. A Fast and Robust Fictitious Domain Method for Modeling Propellant Flow in a Three-Blade Planetary Mixer, 6th ICIAM Conference, Zurich, Switzerland.

88. G. Pianet, D. Vidal and F. Bertrand, 2007. Investigation of Paper Deposition Mechanisms Using a Hybrid DEM-LBM Model, Paptac Annual Meeting, Montreal.

87. J. Doucet, F. Bertrand, N. Hudon and J. Chaouki, 2006. Modeling of Granular Mixing Using a DEM-Based Markov Process Method, AIChE Annual Meeting, San Francisco, USA.

86. M. Lemieux, P. Gosselin, J. Chaouki and F. Bertrand, 2006. Granular Mixing Properties of Cohesionless Granules in Bin- and V-Blenders, AAPS Annual Meeting, San Antonio, Texas, USA.

85. S. Savarmand, P.J. Carreau, F. Bertrand and D. Vidal, 2006. Effect of Strongly Repulsive Particle Interactions on the Rheology of Concentrated Silica Suspensions, 78th Annual Meeting of the Society of Rheology, Portland, ME, USA.

84. M. Lemieux, J. Chaouki and F. Bertrand, 2006. Comparative Study of Cohesionless Granular Mixing in Bin- and V-blenders, 56th CSChE Conference, Sherbrooke, Canada.

83. J. Doucet, F. Bertrand and J. Chaouki, 2006. Modeling of Granular Mixing Dynamics Using Markov Chains and the Discrete Element Method, 56th CSChE Conference, Sherbrooke, Canada.

82. J. Doucet, J. Chaouki and F. Bertrand, 2006. Determination of Macroscopic Mixing Properties of Granular Materials from Particle Tracking Experiments, 56th CSChE Conference, Sherbrooke, Canada.

81. G. Pianet, D. Vidal, E. Desaulniers and F. Bertrand, 2006. A New Model for the Consolidation of Pigments in Paper Coating, 56th CSChE Conference, Sherbrooke, Canada.

80. S. Navaee-Ardeh, F. Bertrand and P.Stuart, 2006. One-Dimensional Heat and Mass Transfer Modeling of a Novel Continuous Biodrying Process: Physical Modeling and Preliminary Results, 56th CSChE Conference, Sherbrooke, Canada.

79. S. Navaee-Ardeh, F. Bertrand and P.Stuart, 2006. Heat and Mass Transfer Modeling of a Novel Biodrying Process : Lumped System Approach and Preliminary Results, 56th CSChE Conference, Sherbrooke, Canada.

78. M. Lemieux, J. Doucet, L.-A. Leclaire, G. Léonard, F. Bertrand and J. Chaouki, 2005. Large Scale Numerical Investigation of Particle Mixing in V-Blenders Using the Discrete Element Method, 55th CSChE Conference, Toronto, Canada.

77. J. Doucet, J. Chaouki and F. Bertrand, 2005. An Extended Radioactive Particle Tracking Method for Systems with Irregular Moving Boundaries, 55th CSChE Conference, Toronto, Canada.

76. H. Lécuyer, J. Mmbaga, F. Bertrand, P.A. Tanguy and R.E. Hayes, 2005. Numerical Investigation of Non-Newtonian Coating Flows in High Speed Forward Deformable Roll Coaters, 55th CSChE Conference, Toronto, Canada.

75. A. Iranshahi, M. Heniche, P.A. Tanguy and F. Bertrand, 2005. Numerical Comparison of the Flow Characteristics of the Ekato PARAVISC with Conventional Viscous Mixing Impellers, 55th CSChE Conference, Toronto, Canada.

74. R. Litto, R.E. Hayes, H. Sapoundjiev, A. Fuxman, F. Forbes, B. Liu and F. Bertrand, 2005. Optimization of a Catalytic Flow Reversal Reactor for the Combustion of Lean Methane Mixtures, 6th International Workshop on Catalytic Combustion, Ischia, Italy.

73. M. Lemieux, J. Doucet, L.-A. Leclaire, F. Bertrand and J. Chaouki, 2005. DEM-Based Simulations of Powder Flows in V-Blenders, Trends in Numerical and Physical Modeling for Industrial Multiphase Flows, Cargese, France.

72. M. Perrier, F. Bertrand, C. Dubois, D. Klvana, R. Legros and P. Farand, 2005. Integrating Process Control and Unit Operations in a Single Core Course of the Chemical Engineering Curriculum, 2nd Canadian Design Engineering Network Conference, Kananaskis, Canada.

71. M. Lemieux, G. Léonard, J. Doucet, L.-A. Leclaire, F. Viens, F. Bertrand and J. Chaouki, 2005. Large Scale Numerical Investigation of Solids Mixing in a V-Blender Using the Discrete Element Method, Particulate Processes in the Pharmaceutical Industry, Montreal.

70. G. Léonard, F. Bertrand, J. Chaouki and P. Gosselin, 2005. An Experimental Investigation of Effusivity as an Indicator of Powder Blend Uniformity, Particulate Processes in the Pharmaceutical Industry, Montreal.

69. J. Doucet, J. Chaouki and F. Bertrand, 2005. An Extended Radioactive Particle Tracking Method for Mapping the Solid Flow Fields in Domains with Moving Boundaries, Particulate Processes in the Pharmaceutical Industry, Montreal.

68. M. Perrier, F. Bertrand, C. Dubois, D. Klvana, R. Legros and P. Farand, 2005. A Case Study in Curriculum Integration of Core Courses in Chemical Engineering, ASEE Annual Conference, Portland, Oregon, USA.

67. J.P. Mmbaga, R.E. Hayes, F. Bertrand and P.A. Tanguy, Modelling High Speed Forward Deformable Roll Coating, 54th CSChE Annual Meeting, Calgary.

66. G. Léonard, J. Chaouki, F. Bertrand and P. Gosselin, 2004. Towards a Better Understanding of Effusivity as a Measure of Mixing Quality, 54th CSChE Annual Meeting, Calgary.

65. J. Bouffard, H. Dumont, R. Legros and F. Bertrand, 2004. Development and Optimization of a Fluid Bed Rotogranulation Process Using Factorial Design, 54th CSChE Annual Meeting, Calgary.

64. M. Korbel, F. Bertrand and P. Stuart, Finite Element Analysis of Novel Biodrying Process: Methodology and Preliminary Results, 2004. 54th CSChE Annual Meeting, Calgary.

63. F. Bertrand, L.-A. Leclaire and G. Levecque, 2004. Numerical Models for the Mixing of Granular Materials, 5th Int. Symp. on Mixing in Industrial Processes, Seville, Spain.

62. F. Bertrand, L.-A. Leclaire and G. Levecque, 2003. Numerical Modeling Challenges in Solid Mixing, AIChE Annual Meeting, San Francisco, USA.

61. N. Ouellet, M. Perrier, F. Bertrand and O. Schoefs, 2003. Observer-Based Parameter Estimation for Nonlinear Parabolic Equations: Development and Application to Unsaturated Soil Hydraulic Conductivity, AIChE Annual Meeting, San Francisco, USA.

60. J. P. Mmbaga, R. E. Hayes, C. A. Huijben, F. Bertrand and P. A. Tanguy, 2003. Simulation and Analysis of Metered Size Press Coatinf Flows, 53th CSChE Annual Meeting, Hamilton.

59. N. Ouellet, M. Perrier and F. Bertrand, 2003. An On-Line Estimator for the Non-Saturated Hydraulic Conductivity Characterizing Water Infiltration Into Soil, 53th CSChE Annual Meeting, Hamilton.

58. R.E. Hayes, L.S. Mukadi, F. Bertrand and C. Audet, 2003. Modelling and Optimisation of the Automotive Catalytic Converter, CMS Summer Meeting, Edmonton.

57. F. Bertrand, 2002. A Local Refinement Based Fictitious Domain Method for the Simulation of Fluid Flow in Complex Geometries, CMS Winter Meeting, Ottawa.

56. R. Giguère, F. Bertrand and P.A. Tanguy, 2002. Adaptive 3D Finite Element Simulations of Fluid Flow in Twin-Screw Extruders, 52th CSChE Conference, Vancouver.

55. E. Desaulniers, L.-A. Leclaire, F. Bertrand and D. Vidal, 2002. Deterministic and Probabilistic Numerical Models for the Packing of Spherical Pigments in Paper Coating, 52th CSChE Conference, Vancouver.

54. S. Fourmanoit, R. Roy and F. Bertrand, 2002. Towards Best Achievable Floating Point Performance on Linear Algebra Computations for COTS Beowulf Clusters, 7th Int. Conf. on Appl. of High-Performance Computers in Engineering, Bologna, Italy.

53. P.A. Tanguy, B. Brocart, F. Bertrand and J. Bousquet, 2002. A Simulation Approach of Emulsification, 3rd World Congress on Emulsions, Lyon.

52. P. A. Tanguy, F. Bertrand, J.-B. Ritz, 2002. Shear-Induced Particle Migration in Mixing Vessels, PPS-18, Guimarães, Portugal.

51. J.P. Mmbaga, R.E. Hayes, F. Bertrand and P.A. Tanguy, 2001. Simulation of a Metering Size Press for Forward Roll Coating, AIChE Annual Meeting, Reno, USA.

50. F. Bertrand, P.A. Tanguy, F. Feugnet and L. Delamare, 2001. A Numerical Model for the Transport of Powders in a Continuous Polymerization Reactor, AIChE Annual Meeting, Reno, USA.

49. S. Savarmand, P. Carreau, F. Bertrand and D. Vidal, 2001. Rheological Properties of Silica Suspensions, 73rd Annual Meeting of the Society of Rheology, Bethesda, USA.

48. S. Savarmand, P. Carreau, F. Bertrand and D. Vidal, 2001. Propriétés rhéologiques de suspensions de particules de silice, 36ème colloque annuel du groupe français de rhéologie, Marne-la-Vallée, France.

47. F. Bertrand, P.A. Tanguy and F. Thibault, 2001. A Local Refinement Based Fictitious Domain Method for the Simulation of 3D Fluid Flow Problems in Complex Geometries, SIAM Annual Meeting, San Diego.

46. F. Bertrand, P.A. Tanguy, F. Thibault and L. Delamare, 2001. A Strategy for the Simulation of Fluid Flow in Twin-Screw Extruders, Mixing XVIII, Pocono Manor, USA.

45. J.P. Mmbaga, R.E. Hayes, F. Bertrand and P.A. Tanguy, 2000. Simulation of Dewatering and Immobilization During Paper Coating, 50th CSChE Conference, Montreal.

44. F. Thibault, F. Bertrand and P.A. Tanguy, 2000. Simulation of Fluid Flow in Twin-Screw Extruders, 50th CSChE Conference, Montreal.

43. J.-B. Ritz, F. Bertrand, F. Thibault and P. A. Tanguy, 1999. Numerical Modeling of Shear-Induced Migration in a Short-Dwell Coater, 20th Annual Meeting of the Canadian Applied and Industrial Mathematical Society, Québec.

42. P. A. Tanguy, F. Bertrand, F. Thibault, F. Fages, M. Lamotte, E. Giraud and M.-H. Fages, 1998. Mécanismes de malaxage dans un malaxeur bipale à mouvement planétaire: simulation numérique 3D et étude expérimentale par traçage fluorimétrique, Récents progrès en génie des procédés, Nancy.

41. P. A. Tanguy, F. Bertrand, E. Brito De La Fuente and P. J. Carreau, 1998. The Effect of Elasticity on the Mixing of Boger Fluids with Helical Ribbons, AIChE Annual Meeting, Miami.

40. R. E. Hayes, F. Bertrand and S. T. Kolaczkowski, 1998. Determining Catalytic Combustion Kinetics from Reactor Light-off Curves, 48th Canadian Chemical Engineering Conference, London, Ontario, Canada.

39. F. Bertrand and P. A. Tanguy, 1998. Three-Dimensional Time-Dependent Fictitious Domain Methods, SIAM Annual Meeting, Toronto.

38. E. Fourcade, F. Bertrand and P. A. Tanguy, 1998. Effect of Coating Rheology in the Metering Nip of a Film Coater, CPPA Annual Meeting, Montréal.

37. P. A. Tanguy, F. Bertrand and P. J. Carreau, 1997. Three-Dimensional Modelling of Boger Fluid Flows in Helical Ribbon Mixers, 69th Annual Meeting of the Soc. Of Rheology, Columbus.

36. K. Feigl, F. Bertrand and P. A. Tanguy, 1997. Finite Element Calculation of 3D Viscoelastic Flows, SIAM Annual Meeting, Stanford.

35. P. A. Tanguy and F. Bertrand, 1997. Industrial Mixing Applications of a 3D Fictitious Domain Method, SIAM Annual Meeting, Stanford.

34. F. Bertrand and P. A. Tanguy, Towards an Efficient Krylov-Based Uzawa Algorithm for Solving the Navier-Stokes Equations, 1997, SIAM Annual Meeting, Stanford.

33. D. Della Valle, P. A. Tanguy, P. Carreau, P. A. Lavoie, L. Parent and F. Bertrand, 1997. A Specific Rheometer for Extensional Properties of Coating Colours, CPPA Annual Meeting, Montréal.

32. E. Fourcade, F. Bertrand, O. Réglat and P. A. Tanguy, 1997. Pressure Modelling in a Metering Size Press With a Deformable Roll Cover, CPPA Annual Meeting, Montréal.

31. E. Fourcade, F. Bertrand and P. A. Tanguy and N. Esmail, 1996. Simulation of Reverse Roll Coating With a Deformable Roll and Shear-Thinning Fluids, AIChE Annual Meeting, Chicago.

30. L. Davoust, R. Moreau, M. D. Cowley, P. A. Tanguy and F. Bertrand, 1996. Numerical and Analytical Modelling of the MHD Buoyancy-Driven Flow in a Bridgman Crystal Growth Configuration, 2nd International Workshop on Modelling in Crystal Growth, Durbuy, Belgium.

29. F. Bertrand, D. Vidal and P. A. Tanguy, 1996. Optimization of a Short-Dwell Time Applicator by the Finite Element Method, CPPA Annual Meeting, Montréal.

28. E. Brito-De La Fuente, T. Espinosa, M. J. L’Heureux, F. Bertrand and P. A. Tanguy, 1995. Non-Isothermal Mixing of Rheologically Complex Fluids With Close Clearance Impellers. AIChE Annual Meeting, Miami.

27. F. Bertrand, P.A. Tanguy, R. Labrie and E. Brito-De La Fuente, 1995. Numerical Investigation of Rheologically Complex Fluid Flow in a Twin-Blade Planetary Mixer, 45th CSChE Conference, Quebec.

26. P. A. Tanguy, F. Bertrand, R. Labrie, E. Brito-De La Fuente and M. H. Fages, 1995. Étude numérique du malaxage de fluides chargés dans un malaxeur bipale à mouvement planétaire, 4ème congrès français de génie des procédés, Lyon.

25. L. Davoust, F. Bertrand, R. Moreau, P. A. Tanguy and R. Bolcato, 1995. Recent Results on MHD Damped Convection in the Horizontal Bridgman Configuration, 14th International Conference on Magnetohydrodynamics, Riga.

24. F. Bertrand and P. A. Tanguy, 1995. A 3D Domain Imbedding Finite Element Method for the Resolution of Moving Boundary Flow Problems, International Congress on Industrial and Applied Mathematics, Hamburg.

23. P. A. Tanguy, F. Bertrand, E. Brito-De La Fuente and A. Tecante, 1994. A Novel Multiple Impeller for Viscous Mixing, AIChE Annual Meeting, San Francisco.

22. F. Thibault, F. Bertrand, P. A. Tanguy and E. Brito-De La Fuente, 1994. Further Investigation of Planetary Mixing - Influence of Rheology and Temperature, AIChE Annual Meeting, San Francisco.

21. P. A. Tanguy, F. Bertrand and E. Brito-De La Fuente, 1994. Mixing of Viscoplastic Fluids With Anchor Impellers. 8th European Conference on Mixing, Cambridge.

20. F. Bertrand, P. A. Tanguy and F. Thibault, 1994. A Numerical Study of the Residence Time Distribution in Static Mixers, 8th European Conference on Mixing, Cambridge.

19. F. Bertrand, P. A. Tanguy and F. Thibault, 1994. A New Finite Element Method for Viscous Flow Problems in Enclosures Containing Moving Parts, SIAM Annual Meeting, San Diego.

18. P. A. Tanguy, F. Bertrand, F. Thibault and L. Choplin, 1993. 3D Modelling of the Mixing of Highly Viscous Polymers With Intermeshing Impellers, AIChE Annual Meeting, St-Louis.

17. K. K. Kabanemi, F. Bertrand, P. A. Tanguy and A. Aït Kadi, 1993. A Transient Finite Element Method for the Resolution of Viscoelastic Fluid Flow Problems by the Method of Characteristics, 8th International Workshop on Numerical Methods in Non-Newtonian Flows, Cape Cod.

16. P. A. Tanguy, F. Thibault, F. Bertrand and L. Choplin, 1993. Macromélange de fluides complexes en réacteur agité : expérimentation et modélisation par éléments finis 3D, 4ème congrès français de génie des procédés, Grenoble (Best Paper Award).

15. F. Bertrand, P. A. Tanguy and D. Pelletier, 1993. Towards an Efficient Iterative Method for Solving the Navier-Stokes Equations Using the 3D Crouzeix-Raviart Element. SIAM Annual Meeting, Philadelphia.

14. E. Brito-De La Fuente, P. J. Carreau, J. Cheng, F. Bertrand, P. A. Tanguy and L. Choplin, 1993. Macromixing of Rheologically Complex Fluids With Helical Impellers, Engineering Foundation Conferences : Mixing XIV, Santa Barbara.

13. P. A. Tanguy, F. Bertrand, R. Lacroix, L. van Dijck, T. Meyer and A. Renken, 1993. Finite Element Flow Simulations in an SMRX Statix Mixer, Engineering Foundation Conferences : Mixing XIV, Santa Barbara.

12. P. A. Tanguy, L. Choplin, R. Lacroix, F. Bertrand, E. Brito-De La Fuente and J.C. Leuliet, 1991. Agitation de fluides visqueux rhéologiquement complexes avec des agitateurs de proximité, 3ème Congrès Français de génie des procédés, Compiègne, France (Nomination for the Best Paper Award).

11. P. A. Tanguy, R. Lacroix, F. Bertrand, L. Choplin and E. Brito-De La Fuente, 1991. Mixing of Rheologically Complex Fluids with an Helical Ribbon Screw Impeller: Experimental and 3D Numerical Results, 7th European Conference on Mixing, Brugges, Belgique.

10. F. Bertrand and P. A. Tanguy, 1990. Finite Element Computations on a Network Using NCS™, AIChE Annual Meeting, Chicago, USA.

09. R. Lacroix, F. Bertrand, P. A. Tanguy, L. Choplin and E. Brito-De La Fuente, 1990. Modelling of Mixing with an Helical Ribbon Screw Impeller, 3rd European Rheology Conference, Edinburgh, UK.

08. P. A. Tanguy, R. Lacroix and F. Bertrand, 1990. Modelling of the Injection Molding Process, Ibid.

07. F. Bertrand and P.A. Tanguy, 1990. Finite Element Computations on a Network Using NCS™, 4th Canadian Supercomputing Symposium, Montréal, Canada.

06. R. Lacroix, F. Bertrand, P. A. Tanguy, L.Choplin and E. Brito-De La Fuente, 1989. 3D Modelling of Mixing with an HRS Impeller, 61st Annual Meeting of the Society of Rheology, Montréal, Canada.

05. R. Lacroix, F. Bertrand, P. A. Tanguy, E. Brito-De La Fuente and L. Choplin, 1989. 3D Modelling of Mixing with an HRS Impeller, Eng. Found. Conf., Mixing XII, Potossi, USA.

04. P. A. Tanguy, R. Lacroix and F. Bertrand, 1989. Flow through Mixers : A New Field of Applications for the Finite Element Method, 5th Annual Meeting of the Polymer Processing Society, Kyoto, Japon.

03. R. Lacroix, F. Bertrand, P. A. Tanguy, L. Choplin and E. Brito-De La Fuente, 1989. Modélisation tridimensionnelle de l'agitation dans un réacteur muni d'une turbine HRS, 2ème congrès français de génie des procédés, Toulouse, France.

02. P. A. Tanguy, F. Bertrand, M. Gadbois and A. Fortin, 1988. A Finite Element Model for the Advective Heat Transfer, XVIIth Int. Congress of Theor. and Appl. Mech., Grenoble, France.

01. P. A. Tanguy, F. Bertrand and M. Gadbois, 1988. A 3D Finite Element Solution of Polymeric Fluid Flow Through Dies, 4th Annual Meeting of the Polymer Processing Society, Orlando, USA.






Thèses et mémoires

34. Olivier Bertrand, novembre 2017. Développement de méthodes basées sur des mesures de pression pour la caractérisation de mélanges non-réactifs solide-liquide en cuve agitée. F. Bertrand (directeur), L. Fradette (co-directeur).

33. Bruno Blais, August 2016. Développement d’un modèle Euler-Lagrange robuste pour la simulation des écoulements solide-liquide dans les opérations de mélange. F. Bertrand (directeur). Prix Roger-Blais de la meilleure thèse de doctorat à l’Ecole Polytechnique de Montréal. Médaille d’or du gouverneur général.

32. Sélim Douieb, March 2016. Étude de l’influence de l’écoulement sur la cristallisation en solution : applications aux hydrates de dioxyde de carbone et à une substance pharmaceutique. L. Fradette (directeur), F. Bertrand (co-directeur), B. Haut (Directeur, Université libre de Bruxelles).

31. Majid Rasouli, August 2015. Dynamics of Cylindrical Particles in a Rotating Drum Using Multiple Radioactive Particle Tracking. J. Chaouki (directeur), F. Bertrand (co-directeur).

30. Hamed Bashiri, août 2015. Numerical and Experimental Investigation of Liquid and Gas/Liquid Flows in Stirred Tank Reactors, J. Chaouki (directeur). F. Bertrand (co-directeur).

29. Manon Lassaigne, août 2015. Étude expérimentale du mélange solide-liquide : caractérisation des suspensions concentrées en milieu visqueux. F. Bertrand (directeur), L. Fradette (co-directeur).

28. Guillaume Matte-Deschênes, 2014. Modélisation de l’efficacité de capture de filtres particulaires pour moteur diesel. F. Bertrand (directeur).

27. Julie Olmiccia, août 2013. Développement d’outils numériques d’évaluation de la distribution des temps de séjour et de génération de maillage pour la modélisation de l’écoulement de fluides dans des mélangeurs continus. F. Bertrand (directeur), M. Heniche (co-directeur).

26. Cyrille Séguineau de Préval, juillet 2013. Vers la simulation d’écoulements turbulents dans un convertisseur catalytique par la méthode de Boltzmann sur réseau. F. Bertrand (directeur).

25. Laurent Spreutels, 2013. Séchage de levures en lit à jet conique : expérimentation et modélisation multi-échelles. R. Legros (directeur), F. Bertrand (co-directeur), J. Chaouki (co-directeur), B. Haut (Directeur, Université libre de Bruxelles).

24. Alexandre Cabana, 2013. Modélisation numérique d’écoulements de particules cohésives par la méthode des éléments discrets. F. Bertrand (directeur), J. Chaouki (co-directeur).

23. Olivier Dubé, 2013. Dynamique particulaire dans des lits fixes et rotatifs. F. Bertrand (directeur), J. Chaouki (co-directeur).

22. Ebrahim Alizadeh, 2013. Numerical and Experimental Investigation of Solid Mixing and Segregation in Tumbling Blenders, J. Chaouki (directeur), F. Bertrand (co-directeur). Mention spéciale pour la meilleure thèse de doctorat à l’Ecole Polytechnique de Montréal.

21. Vincent Stobiac, 2013. Développement d’une méthode de Boltzmann sur réseau pour la simulation d’écoulements visqueux en cuves agitées, F. Bertrand (directeur), P.A. Tanguy (co-directeur). En lice pour la meilleure thèse de doctorat à l’Ecole Polytechnique de Montréal.

20. Yoann Guntzburger, 2012. Une méthode expérimentale d’évaluation globale du pompage d’un agitateur : application au mélangeur en milieux newtonien et non-newtonien, L. Fradette (directeur), F. Bertrand (co-directeur). En lice pour le meilleur mémoire de maîtrise à l’Ecole Polytechnique de Montréal.

19. André Fontaine, 2012. Étude de l’hydrodynamique de fluides rhéologiquement complexes dans un mélangeur Maxblend par vélocimétrie laser, F. Bertrand (directeur), L. Fradette (co-directeur). En lice pour le meilleur mémoire de maîtrise à l’Ecole Polytechnique de Montréal.

18. J. Bouffard, 2011. Dynamique d’écoulement et de pellétisation dans un granulateur à rotor, J. Chaouki (directeur), F. Bertrand (co-directeur).

17. M. P. Guerrero, 2011. Développement de papier bioactif par couchage à grande échelle d’enzymes immobilisées par microencapsulation, D. Rochefort (directeur), F. Bertrand (co-directeur).

16. S. Navaee-Ardeh, 2009. Design, Experimentation, and Modeling of a Novel Continuous Biodrying Process, P. Stuart (directeur), F. Bertrand (co-directeur).

15. M. Perrault, 2009. Comportement du stéarate de magnésium lors du mélange de poudres pharmaceutiques, F. Bertrand (directeur), J. Chaouki (co-directeur). En lice pour le meilleur mémoire de maîtrise à l’Ecole Polytechnique de Montréal.

14. D. Vidal, 2008. Développement d’algorithmes parallèles pour la simulation d’écoulements de fluides dans les milieux poreux, F. Bertrand (directeur), R. Roy (co-directeur).

13. J. Doucet, 2008. Mesure et caractérisation du mélange dans les systèmes granulaires denses, J. Chaouki (directeur), F. Bertrand (co-directeur).

12. B. Coesnon, 2007. Modélisation du procédé de malaxage tripale à mouvement planétaire par une nouvelle approche des domaines fictifs, F. Bertrand (directeur), P.A. Tanguy (co-directeur). En lice pour le meilleur mémoire de maîtrise à l’Ecole Polytechnique de Montréal.

11. M. Lemieux, 2006. Etude comparative du mélange granulaire à écoulement libre dans un mélangeur en V et un mélangeur simple cône, F. Bertrand (directeur), J. Chaouki (co-directeur).

10. H. Lécuyer, 2006. Modélisation numérique de l’écoulement de suspensions dans les procédés de couchage par rouleau de transfert, F. Bertrand (directeur), P.A. Tanguy (co-directeur). Finaliste pour le meilleur mémoire de maîtrise à l’Ecole Polytechnique de Montréal.

09. G. Léonard, 2005. Caractérisation du mélange de poudres dans les procédés pharmaceutiques à l’aide de mesures d’effusivité, F. Bertrand (directeur), J. Chaouki (co-directeur). Mention spéciale pour le meilleur mémoire de maîtrise à l’Ecole Polytechnique de Montréal en 2004-2005.

08. L.-A. Leclaire, 2004. Parallélisation de la méthode des éléments discrets appliquée aux écoulements granulaires, F. Bertrand (directeur).

07. R. Giguère, 2004. Modélisation numérique d’écoulements de fluide dans des petits entrefers en trios dimensions par éléments finis virtuels, F. Bertrand (directeur), P. A. Tanguy (co-directeur).

06. E. Desaulniers, 2003. Modélisation et caractérisation de l’entassement de pigments lors de procédés de couchage du papier. Mémoire de maîtrise, département de génie chimique, F. Bertrand (directeur). Finaliste pour le meilleur mémoire de maîtrise à l’Ecole Polytechnique de Montréal.

05. N. Ouellet, 2003. Estimation en temps réel de la conductivité hydraulique non saturée au cours d’une infiltration d’eau à travers un sol. Mémoire de maîtrise, département de génie chimique, M. Perrier (directeur), F. Bertrand (co-directeur).

04. S. Alonso, 2000. Metering Film Hydrodynamics in Film Coating. Thèse de doctorat, département de génie chimique, P. A. Tanguy (directeur), F. Bertrand (co-directeur).

03. F. Bertrand, 1995. Modélisation tridimensionnelle du procédé de malaxage à mouvement planétaire de fluides visqueux rhéologiquement complexes. Thèse de Doctorat, Institut National Polytechnique de Lorraine, France.

02. F. Bertrand, 1991. Calculs d'éléments finis en parallèle sur un réseau à l'aide de NCS™. Mémoire de fin d'études pour le Baccalauréat en informatique, Université Laval, Québec.

01. F. Bertrand, 1985. Résolution numérique par éléments finis du problème des plaques de Mindlin-Reissner. Thèse de Maîtrise, Université Laval, Québec.

Brevets

02. A. Arzate, F. Bertrand, O. Réglat and P.A. Tanguy, 2002. Apparatus and Method for Measuring the Rheological Properties of a Power Law Fluid, US 6412337B1.

01. A. Arzate, F. Bertrand, O. Réglat and P.A. Tanguy, 2001. Apparatus and Method for Measuring the Rheological Properties of a Power Law Fluid, EP 01902199.7-1234.

 

Organisation à des congrès

09. Conference Chair, Mixing XXV, Quebec City, 2016.

08. Conference Co-Chair, Enabling Process Innovation Through Computation, Banff, 2016.

07. Conference Co-Chair, International Conference “Trends for the Numerical and Physical Modeling of Industrial Multiphase Flows”, Cargese, 2012.

06. Treasurer for the 8th World Congress of Chemical Engineering, Montreal, 2009.

05. Chair of the 3rd international conference “Trends for the Numerical and Physical Modeling of Industrial Multiphase Flows”, Cargese, 2005.

04. Scientific advisory board for the biannual international conference “Trends for the Numerical and Physical Modeling of Industrial Multiphase Flows”, Cargese, since 2001.

03. Scientific advisory board for the 5th Int. paper and Coating Chem. Symp., Montreal, 2003.

02. Treasurer for the 50th CSChE Conference, Montreal, 2000.

01. F. Bertrand and R. Glowinski, 1998. Minisymposium on Fictitious Domain Methods, SIAM Annual Meeting, Toronto.

 

Enseignements

  • GCH3100 - Opérations unitaires
  • GCH2535 - Modélisation numérique en génie chimique
  • GCH2550 - Projet de modélisation en génie chimique
  • GCH6914 - Méthodes des éléments finis en génie chimique

 

Projets de recherche

  • Mise au point de méthodes radioactives de suivi de particules pour les écoulements de poudres dans les procédés de mélange (M. Rasouli, étudiant au doctorat)
  • Développement d'un procédé de séchage d'aliments par lit à jet (L. Spreutels, étudiant au doctorat)
  • Modélisation d'écoulements polyphasiques dans des réacteurs agités (H. Bashiri, étudiant au doctorat)
  • Parallélisation d'un code de DEM sur cartes graphiques (D. Dubé, étudiant au doctorat)
  • Méthode de Boltzmann sur réseaux non structurés (D. Chauveheid, chercheur postdoctoral)
  • Modélisation de l'écoulement de gaz dans des convertisseurs catalytiques à l'aide de la méthode de Boltzmann sur réseau (C. Séguineau de Préval, étudiant à la maîtrise)
  • Modélisation par éléments finis de l'écoulement de fluides dans des procédés d'extrusion (J. Olmiccia, étudiante à la maîtrise)
  • Etude des mécanismes de cristallisation en cuve agitée (S. Douieb, étudiant au doctorat)
  • Modélisation d'écoulements de fluides polyphasiques incompressibles en génie des procédés (D. Vidal, associé de recherche)